聚合物颗粒干燥用离心干燥机

各种干燥机型号可以与 MAAG 的水下造粒系统和拉条造粒系统结合使用。

作为附件,CENTRO和CYCLO®离心干燥机可以与Automatik和Reduction Engineering Scheer的水下造粒系统以及圆柱形、球形颗粒干燥用的MAAG水下造粒系统有效结合。

了解更多…

原料干燥用冲击式干燥机
温和干燥带式干燥机

干燥机产品列表

Application: 聚合物生产
Category: 干燥机
MAAG | Pellet dryer | Easy Access

EA

All members of the EASY ACCESS centrifugal pellet dryer series from Gala offer wide doors which permit easy, convenient and safe access for internal cleaning and maintenance. All Gala pellet dryers are supplied with door timed interlocks [...]

Application: 母粒 • 混炼 • 聚合物生产
Category: 干燥机
MAAG | Centrifugal pellet dryer process | ECLN Model

型号 ECLN

Easy-Clean Low-Noise (ECLN) pellet dryers are particularly easy to service and meet high demands on noise reduction < 80 dB(A). Features:

  • Double walls filled with insulating material. Sound pressure level of < 80 dB(A) [...]

Application: 母粒 • 混炼 • 聚合物生产
Category: 干燥机
MAAG | Centrifugal pellet dryer system cleaning | SC Model

型号 SC

The Gala Self-Cleaning Pellet Dryer is designed to achieve a high degree of self-cleaning which will reduce the otherwise common downtimes to a minimum. In most cases, this centrifugal pellet dryer does not need to be cleaned and nor [...]

Application: 母粒 • 混炼 • 聚合物生产
Category: 干燥机
MAAG | Pellet dryer producion | High-Capacity Model

大产能干燥机

Gala has engineered a high capacity centrifugal pellet dryer for continuous processes. Large resin producers have the need for higher capacity, continuous operation pellet dryers. By utilizing patented processes and innovative equipment [...]

Application: 聚合物生产
Category: 干燥机
MAAG | Centrifugal Dryer for Recycled Products

用于回收物料的离心干燥机

Pellet dryer designs are based on current product rate testing. Gala has been conducting extensive testing on our centrifugal recycled plastic pellet dryers at full production rates since early [...]

Application: 回收
Category: 干燥机

从水下造粒机的切粒室出来的颗粒/水混合物通过颗粒/水管线被输送到离心干燥机的入口,在该入口的上游是块料分离器。在水流量少的干燥机中,工艺水直接在干燥机动刀区域分离。其他干燥系统配有上游脱水系统。

离心干燥机动刀的快速旋转以及动刀区域布置的提升装置让颗粒以螺旋向上方式输送,这时颗粒与提升装置和筛网碰撞。水被筛网分离,颗粒则不断被输送到干燥机上部。再通过颗粒排料从中排出。干燥过程减少残留水分的程度取决于不同的聚合物和过程控制。在筛网上部三分之二的表面以及离心干燥机的颗粒出口处实现了基本干燥。聚合物颗粒的残留水分也取决于颗粒的尺寸、形状、表面和其他性质。

原料干燥用冲击式干燥机

AERO冲击式干燥机M-USG水下拉条造粒系统定期结合使用,对塑料颗粒进行干燥。几十年来,AERO干燥机始终具备良好的干燥性能,尤其是结合原始聚合物原料使用。

温和干燥带式干燥机

DURO带式干燥机是MAAG水下造粒系统的理想搭配设备,用于生产磨料或脆性颗粒,如高玻璃纤维填充或矿物填充复合物。因为颗粒和干燥机部件之间没有相对运动,颗粒的干燥方式非常温和。

联系方式
公司手册